Porsche 928 Cover Fitting
- Keep and label all foam pads from centre cushion cover parts, mark direction = front or top + sequence, as these will need to be used again on new covers.
- Use steam ( take care to protect yourself from the steam) to return foam pads to the correct shape if needed, use 1/4 inch foam supplied to skin pads to fill out cover parts if required.
- Hog ring clips / fastners are supplied ( you will need a matching tool for their use, not supplied) it is possible to improvise with small zip ties if nothing else is available.
- Fitting detail on centre cover parts = arrange tails of seams to point inward on top of cushions, see drawing ( this detail can sometimes be seen on the original covers as they are removed).
- On the backrest centre cushion the cover is fixed around the back by staples which are applied by a special staple gun ( staples go in & are then splayed outwards into the foam), this is an expensive tool costing £700+, which we have in our shop. Alternatively, it is possible to fix this area using contact glue. When the cover isfixed on foam face parts glue the foam & matching cover parts that attach to the back of the cushion & bring together when touch dry.